Kyocera ECOSYS PA4500cx Operation Manual page 299

Troubleshooting > Troubleshooting
2 Adjust the paper length guide to the paper size required. Press the paper length adjusting tab and slide
the guides to the paper size required.
3 Turn the size dial so that the size of the paper you are going to use appears in the paper size window.
NOTE
Set the size dial to Other if you wish to use paper that is other than the Standard Size. In this case, it is
necessary to set the paper size from the operation panel.
➡
Specifying Paper Size and Media Type (page 99)
3
Load paper.
1 Fan the paper, then tap it on a level surface to avoid paper jams or skewed printing.
292