Kyocera ECOSYS PA4500cx Operation Manual page 221

System Menu > Network
[POP3]
Item
[Off/On]
[RAW Port]
Item
[Off/On]
[AvailableNetwork]
[LPD]
Item
[Off/On]
[AvailableNetwork]
[IPP]
Item
[Off/On]
[AvailableNetwork]
Select whether to receive E-mail using POP3.
Value: [Off], [On]
Set whether to receive documents using the Raw Port.
The setting will be changed after restarting the device or network.
Value: [Off], [On]
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Set whether to send documents using LPD.
The setting will be changed after restarting the device or network.
Value: [Off], [On]
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Set whether to send documents using IPP. To use this, select [On] for
this setting, and select [Off] for [TLS] in the [Security]. Then select [Not
Secure (IPPS & IPP)] in the security settings from Command Center RX.
The default port number is 631.
Value: [Off], [On], 1 to 32767 (Port Number)
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
214
Description
Description
Description
Description