Kyocera ECOSYS PA4500cx Operation Manual page 203

System Menu > Print Settings
[Print Quality]
Set the printing quality.
Value
[KIR]
[EcoPrint]
[EcoPrint SaveLvl]
[Gloss Mode]
[Print Resolution]
Select the default KIR (smoothing) setting.
Value: [Off], [On]
EcoPrint conserves toner when printing. This is recommended for test
copies where faded printing is not a problem.
Value: [Off], [On]
Select the default Toner Save Level (EcoPrint).
Value: 1 (low), 2, 3, 4, 5 (high)
Raising the level reduces toner consumption, but image quality falls.
Gloss Mode increases the effect of glossiness in printing. However,
printing takes longer time.
Value: [Off], [On]
IMPORTANT
This function is not available when [Labels] or [Transparency] is selected
as the paper type setting.
➡
Paper Settings (page 188)
Depending on the paper used, printing in gloss mode may cause curl in
paper. To reduce curl, try using thicker paper.
Set the resolution used for printing.
Value: 600 dpi, 1200 dpi
NOTE
Settings that are received from the printer driver have priority over the
operation panel settings.
196
Description