Table of Contents
Advertisement
11 Configure the settings relating to images and audio [Image/Audio]
Note
•
This function is also useful to automatically set the camera in a specific mode when the power of the
camera is turned on.
•
The self return function works even when the setup menu is displayed.
[Self return time]
Select a waiting time (amount of time until the camera starts the selected operation after the end of the manual
operations) from the following.
10s/ 20s/ 30s/ 1min/ 2min/ 3min/ 5min/ 10min/ 20min/ 30min/ 60min
•
Default: 1min
[Image hold]
Select "On" or "Off" to determine whether or not to hold the still image on the screen (that is displayed at the
last moment before the camera started to move to a preset position) until the camera has moved to the preset
position.
•
On: A still image will be held on the screen until the camera has moved to the preset position.
•
Off: Images from the camera will be displayed even when the camera is moving to the preset position.
•
Default: Off
[Upside-down]
Select "On" or "Off" to determine whether or not to turn the image upside-down.
•
On: The image is turned upside-down.
•
Off: The image is not turned upside-down.
•
Default: Off
IMPORTANT
•
Only use the upside-down function to check the image before installing the camera. Set this function
to "Off" after installing the camera.
[HD Extra optical zoom]
Select the HD extra optical zoom setting from the following.
•
On (Max X45): Images can be zoomed in on with the optical zoom (1x - 30x) and the HD extra optical
zoom (higher zoom factors, up to 45x).
•
Off (Max X30): Does not use the HD extra optical zoom.
•
Default: On (Max X45)
About HD extra optical zoom
Among approx. 2.07 megapixel image capture area of the MOS image sensor, the central part of approx. 0.92
megapixels is extracted for shooting. That enables the shooting with a higher zooming effect. When the image
capture size of 1280x720 or less is applied, the zoom factor can be adjusted up to 45x.
[Extra optical zoom]
Select the extra optical zoom setting from the following.
•
On (Max X90): Images can be zoomed in on with the optical zoom (1x - 30x) and the extra optical zoom
(higher zoom factors, up to 90x).
•
Off (Max X30): Does not use the extra optical zoom.
•
Default: On (Max X90)
About extra optical zoom
Among approx. 2.07 megapixel image capture area of the MOS image sensor, the central part of approx. 0.23
megapixels is extracted for shooting. That enables the shooting with a higher zooming effect. When the image
capture size of 640x360 or less is applied, the zoom factor can be adjusted up to 90x.
96
Operating Instructions
SW397B
SC387A
SW598A
SC588A
Advertisement
Table of Contents
