Panasonic WV-SW598APJ Operating Instructions Manual page 58

10 Configure the basic settings of the camera [Basic]
[Service]
Select "Viewnetcam.com" or "Off" to determine whether or not to use "Viewnetcam.com".
By selecting "Viewnetcam.com" and clicking the [Set] button, the registration window for "Viewnetcam.com"
will be displayed in a newly opened window.
Follow the on-screen instructions to register with "Viewnetcam.com".
Refer to page 191 or the "Viewnetcam.com" website (http://www.viewnetcam.com/) for further information.
•
Default: Off
Note
•
When the "DDNS" setting is changed, the "DDNS" setting on the [DDNS] tab of the "Network" page
also changes to the same setting.
[Recommended network setting for internet]
The recommended settings for connecting to the Internet are performed here.
By clicking the [Set] button, a dialog displaying how the following settings will change is displayed.
Click the [OK] button after checking the settings to change the settings to the displayed values.
–
[JPEG/H.264] tab on the "Image/Audio" page
[JPEG]
[Image capture size]:
VGA/640x360
VGA/640x360/800x600
[H.264(1)]/[H.264(2)]
[Internet mode (over HTTP)]: On
[Transmission priority]: Best effort
[Max bit rate (per client)*]: Max. 1024 kbps, Min. 128 kbps
[H.264(1)]
[Image capture size]:
VGA/640x360
VGA/640x360/800x600
[H.264(2)]
[Image capture size]: QVGA/320x180
–
[Network] tab on the "Network" page
[Common]
[Max RTP packet size]: Limited(1280byte)
[HTTP max segment size(MSS)]: Limited(1280byte)
58 Operating Instructions
SW598A SC588A
SW397B SC387A
SW598A SC588A
SW397B SC387A