Panasonic WV-SW598APJ Operating Instructions Manual page 90

11 Configure the settings relating to images and audio [Image/Audio]
H.264(1)/H.264(2)
[H.264 transmission]
Select "On" or "Off" to determine whether or not to transmit H.264 images.
•
On: Transmits H.264 images.
•
Off: Does not transmit H.264 images.
•
Default: On
Note
•
When "On" is selected for "H.264 transmission" in "H.264(1)" or "H.264(2)", displaying of H.264 images
or JPEG images on the "Live" page will become available.
•
When "On" is selected for "H.264 transmission" in "H.264(1)" and "H.264(2)", H.264 images are
viewable using other devices with each setting.
•
When "On" is selected for "H.264 transmission" in "H.264(1)" or "H.264(2)", the transmission interval
of JPEG images may sometimes become longer.
[Internet mode (over HTTP)]
Select "On" when transmitting H.264 images via the Internet. It is possible to transmit H.264 images without
changing the broadband router settings configured for JPEG image transmission.
•
On: H.264 images and audio will be transmitted using the HTTP port. Refer to page 169 for further
information about the HTTP port number settings.
•
Off: H.264 images and audio will be transmitted using the UDP port.
•
Default: Off
Note
•
When "On" is selected, only "Unicast port (AUTO)" will be available for "Transmission type".
•
When "On" is selected, it may take time to start displaying H.264 images.
•
When "On" is selected, H.264 images may not be displayed depending on the number of the concurrent
access user and audio data availability, etc.
•
When "On" is selected, only IPv4 access is available.
[Image capture size]
Select the image capture size from the following.
SW598A SC588A
When "2 mega pixel [16:9]" is selected for "Image capture mode"
H.264(1): 1920x1080/640x360/320x180
H.264(2): 640x360/320x180
When "1.3 mega pixel [16:9]" is selected for "Image capture mode"
1280x720 /640x360/320x180
*1
When "1.3 mega pixel [4:3]" is selected for "Image capture mode"
1280x960 /VGA/QVGA
*1
SW397B SC387A
When "16:9" is selected for "Aspect ratio"
1280x720/640x360/320x180
When "4:3 (VGA)" is selected for "Aspect ratio"
1280x960/VGA/QVGA
When "4:3 (800x600)" is selected for "Aspect ratio"
1280x960/800x600/QVGA
•
Default:
SW598A SC588A
–
H.264(1): 1920x1080
–
H.264(2): 640x360
90 Operating Instructions