Table of Contents
Advertisement
11 Configure the settings relating to images and audio [Image/Audio]
The Patrol function can be configured to learn pan, tilt, zoom, focus, and brightness settings and operations,
and then use these learned settings and operations to operate the camera.
Patrol setting
[Number of patrol pattern]
Select the patrol pattern number. The length of patrol patterns that can be learned differs depending on the
pattern number.
•
1: 2 minutes of operations can be learned for Patrol 1.
•
2: 1 minute of operations can be learned for both Patrol 1 and Patrol 2.
•
4: 30 seconds of operations can be learned each for Patrol 1, Patrol 2, Patrol 3, and Patrol 4.
•
Default: 1
Note
•
When the number of control patterns is changed, the learned patrol operations are deleted.
[Learn patrol pattern]
Click [
] of "Patrol No." and select a patrol number (1-4) from the pull-down menu. An asterisk (*) next to the
patrol number indicates that the patrol operation has already been learned for the patrol number.
With the patrol number selected, click the [Learn] button to start learning the camera operations. During
learning, "LEARNING (***S)" is displayed on the screen. "***S" is the length of possible learning time remaining.
Click the [Stop] button to stop learning and replaying camera operations. When the remaining time is zero
seconds (OS), operations are automatically stopped.
With the patrol number selected, click the [Confirm] button to replay the learned camera operations.
116
Operating Instructions
Advertisement
Table of Contents
