Shutting Down The Projector - BenQ LK935 User Manual

The info page displays the information and status of this projector.
For more information, visit

Shutting down the projector

1. Press and a confirmation message will appear
prompting you. If you don't respond in a few seconds,
the message will disappear.
2. Press a second time. The power indicator flashes
orange, the projection light source shuts down, and the
fans will continue to run for approximately 90 seconds
to cool down the projector.
3. Once the cooling process finishes, the power indicator
becomes a steady orange and fans stop. Disconnect
the power cord from the power outlet.
• To protect the light source, the projector will not respond to any commands during the cooling process.
• Avoid turning on the projector immediately after turning it off as excessive heat may shorten lamp life.
• Lamp life results will vary depending on environmental conditions and usage.
http://www.crestron.com
Press Exit to go back to the remote
network operation page.
& www.crestron.com/getroomview.
Operation 27