BenQ LK935 User Manual page 39

3D
HDMI Settings
• Apply 3D Settings
After the 3D settings are saved, you can decide if you would like to apply
them by choosing a set of 3D settings that you have saved. Once applied,
the projector will automatically play the incoming 3D contents if it matches
the 3D settings saved.
Only the set(s) of 3D settings with memorized data is available.
• HDMI Format
Selects a suitable RGB color range to correct the color accuracy.
• Auto: Automatically selects a suitable color range for the incoming
HDMI signal.
• Limited: Utilizes the Limited range RGB 16-235.
• Full: Utilizes the Full range RGB 0-255.
• HDMI Equalizer
Sets a suitable value to maintain the HDMI picture quality in long distance
data transmission.
• HDMI EDID
Switches between Enhanced for HDMI 2.0 EDID and Standard for HDMI 1.4
EDID. Selecting Standard which supports up to 1080p 60Hz may solve
abnormal display issues with some old players.
When the Aspect Ratio is 21:9, the HDMI EDID is fixed at Standard. To change the settings
switch to a different aspect ratio.
• Electronics Control
When you enable this function and connect an HDMI CEC-compatible
device to your projector with an HDMI cable, turning on the HDMI CEC
compatible device automatically turns on the projector, while turning off
the projector automatically turns off the HDMI CEC compatible device.
• Audio Return (HDMI-2)
When connecting to ARC compatible speaker to the projector with HDMI
cables, the audio can be returned to these speakers from the projector
HDMI 2 port.
HDMI-1 audio can via ARC function (HDMI-2) to output audio to external
speakers.
• Power On Link/Power Off Link
When you connect an HDMI CEC-compatible device to your projector with
an HDMI cable, you can set the behavior of powering on/off between the
device and the projector.
Power On Link >
From Device
Power Off Link>
From Projector
When the connected device is turned on, the projector
will be activated, too.
When the projector is turned off, the connected
device will be shut down, too.
Menu operation 39