Table of Contents
Advertisement
Shutting down the projector
1. Press
on the projector or remote control and a
confirmation message will appear prompting you. If
you don't respond in a few seconds, the message
will disappear.
2. Press
a second time. The power indicator
flashes orange, the projection light source shuts
down, and the fans will continue to run for
approximately 2 seconds to cool down the projector.
3. Once the cooling process finishes, the power
indicator becomes a steady orange and fans stop.
Disconnect the power cord from the power outlet.
To protect the light source, the projector will not respond to any commands during the cooling process.
32 Operation
Advertisement
Table of Contents
