BenQ LK935 User Manual page 43

Image Resizing
Warping
• Digital Zoom
Magnifies or reduces the projected image size.
1. After the adjustment bar displays, press
ZOOM+/ZOOM- on the remote control repeatedly to reduce or magnify
the image to a desired size.
2. Press OK to enter panning mode.
3. Press the directional arrows ( ,
control to navigate the picture.
The picture can only be navigated after it is magnified. You can further magnify the picture
while searching for details.
• Digital Shrink & Shift
Shrinks and/or shifts the projected image.
1. After the adjustment bar displays, press
magnify the picture to a desired size.
2. Press OK to activate digital shift function.
3. After digital shift function is activated, press the directional arrows ( ,
, , ) to shift the image.
4. Press AUTO to restore the picture to its original size.
The picture can only be shifted after it shrank.
• Blanking
Blanks some parts of the projected image.
1. Select the Modes of Adjustment first by pressing
2. Press / to highlight the area you want to adjust and press
adjust its range.
This function aims at correcting the geometric distortion of the projector's
images when they are projected onto an uneven surface such as a cylinder,
a spherical shape, etc.
• Enable
When this function is enabled, the following functions will not be available:
3D Keystone, Corner Fit, Digital Shrink & Shift, Blanking.
• Warping Pattern
After the warping function is enabled, select a pattern.
/ on the projector or
, , ) on the projector or remote
/ repeatedly to shrink or
/ .
/ to
Menu operation 43