Shutting Down The Projector - BenQ LW855UST User Manual

Check Device Manager from your computer to make sure that PointWrite device is recognized by
your computer.
When finishing the PointWrite module installation, please refer to the PW30U user manual for
further instruction.

Shutting down the projector

1. Press POWER on the projector or
remote control and a confirmation message will
appear prompting you. If you don't respond in a few
seconds, the message will disappear.
2. Press POWER or
indicator flashes orange, the projector shuts down,
and the fans will continue to run for approximately
3 seconds to quick cool down the projector.
3. Once the cooling process finishes, the power indicator becomes a steady orange and fans
stop. Disconnect the power cord from the power outlet.
on the
a second time. The power
Operations
33