BenQ LK935 User Manual page 41

4. Main menu: Installation
Structure
Menu
Projector Position
3D Keystone
Auto Vertical Keystone
12V Trigger
Test Pattern
High Altitude Mode
Serial Port Setting
Corner Fit
Image Resizing
Warping
Image Memory
Function descriptions
Menu
Projector
Position
3D Keystone
Auto Vertical
Keystone
12V Trigger
Port Selection
Baud Rate
Digital Zoom
Digital Shrink & Shift
Blanking
Enable
Warping Pattern
Warping Background
Warping Correction
Reset
Save Image Memory
Apply Image Memory
Rename
The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See Choosing a location on page 10
See Correcting keystone on page 16
Automatically corrects the keystoning at the left/right side of the projected
image.
There is one 12V trigger that works independently according to your needs
for installation scenarios.
• Off: If this is selected, the projector will not send electronic signal out
when it is turned on.
• On: The projector will send a low to high electronic signal out when it is
turned on, a high to low signal out when it is turned off.
Options
Front/Front Ceiling/Rear/Rear Ceiling
H: -40 – +40
V: -40 – +40
R: -40 – +40
Off/On
Off/On
On/Off
On/Off
RS232/HDBaseT
9600/14400/19200/38400/57600/
115200
0~60
1.0X – 1.8X/2.0X
0.75X~1.0X
Modes of Adjustment
Top
Bottom
Left
Right
On/Off
5x3/10x5/15x9/24x15
Reset/Cancel
Memory-1/Memory-2/Memory-3/
Memory-4/Memory-5
Descriptions
for details.
for details.
Menu operation 41