BenQ LK935 User Manual page 37

Function descriptions
Menu
Aspect Ratio
Auto Source
Search
Source Rename
3D
There are several options to set the image's aspect ratio depending on your
input signal source.
• Auto: Scales an image proportionally to
fit the projector's native resolution in its
horizontal or vertical width.
• 4:3: Scales an image so that it is
displayed in the center of the screen with
a 4:3 aspect ratio.
• 16:9: Scales an image so that it is
displayed in the center of the screen with
a 16:9 aspect ratio.
• 16:10: Scales an image so that it is
displayed in the center of the screen with
a 16:10 aspect ratio.
• 2.4:1: Scales an image so that it is
displayed aligned with the upper edge of
the display region with a 2.4:1 aspect
ratio.
• 21:9: Scales an image so that it is
displayed aligned with the upper edge of
the display region with a 21:9 aspect
ratio.
Allows the projector to automatically search for a signal.
Renames the current input source to your desired name.
On the Source Rename page:
1. Press OK to display the on-screen keyboard.
2. Press / / / to select each desired digit/letter, and press OK to
confirm each input.
3. Repeat the step above and when done, press BACK and
Commit.
4. Press OK and the source name changes.
This projector supports playing three-dimensional (3D) content transferred
through your 3D-compatible video devices and contents, such as
PlayStation consoles (with 3D game discs), 3D Blu-ray players (with 3D
Blu-ray discs), and so on. After you have connected the 3D video devices to
the projector, wear the BenQ 3D glasses and make sure the power is on to
view 3D contents.
Descriptions
15:9 picture
4:3 picture
16:9 picture
16:10 picture
2.4:1 picture
21:9 picture
to highlight
Menu operation 37