Table of Contents
Advertisement
Simulator
Settings
Factory Default
Reset System
• Simulator Mode
When this function is activated, the following settings will apply:
• Picture Mode will be set as sRGB.
• Direct Power On will be set as On.
• Fast Mode will be activated.
• Standby Mode will be set as Normal.
• IR Receiver
You can enable or disable selected remote receiver.
Returns all settings to the factory preset values.
The following settings will still remain: Projector Position, 3D Keystone, Auto Vertical
Keystone, 12V Trigger, High Altitude Mode, Baud Rate, Corner Fit, Digital Shrink & Shift,
Blanking, Warping, Light Source Information, Security Settings, Network Settings,
Projector ID Setting.
Returns all the settings on the System main menu to the factory default
values.
The following settings will still remain: Light Source Information, Security Settings,
Network Settings, Projector ID Setting.
Menu operation
49
Advertisement
Table of Contents
