Remote Control - Tripp Lite APSWX Series Owner's Manual

3. Installation

3.6 Remote Control

The Inverter/Charger is packaged with a wired remote control that allows viewing and controlling the inverter state.
1. Find an indoor location suitable for the remote to be installed. Make a small template using the center-to-center
markings as shown below:
85 mm
75 mm
2. Align the keyhole slots to the user-supplied mounting screws.
3. Making sure both the remote and Inverter/Charger are in "UNIT OFF" position, connect the cable to the remote
port on the Inverter/Charger.
34.7 mm
55 mm
15
69 mm
3 mm
6 mm