Table of Contents
Advertisement
ALERT CODE
+ number
50
POSSIBLE CAUSES
The oven has overheated.
Door lock error: the door
cannot be locked after you
have started a Self Clean cycle.
Door lock error: the door
cannot be unlocked after a Self
Clean cycle has finished.
Technical fault.
ALERT CODES
WHAT TO DO
1 Allow the oven to cool down.
2 Once the oven has cooled down
1 Turn the power to the oven off at
2 Wait approximately 10 seconds.
3 Set the clock. See 'Setting the
4 Try starting a Self Clean cycle
1 Turn the power to the oven off at
2 Try touching on the oven door to
3 If this doesn't help and the
1 Note down the alert code.
2 Wait until the cooling fans
3 Turn the power to the oven off at
4 Call your Authorized Repairer or
and the door has unlocked, the
alert code will disappear. You can
now use the oven again.
the wall and on again.
This is to allow the door lock to
return to its initial position.
clock and first use' for instructions.
again, making sure that you close
the door firmly. See 'Using the Self
Clean function'.
the wall and on again.
help the door lock disengage.
alert code reappears, call your
Authorized Repairer or Customer
Care.
have stopped and the oven has
completely cooled down.
the wall.
Customer Care with the alert code
information.
Advertisement
Table of Contents
