Fisher & Paykel OB30SCEPX3 N User Manual page 31

Aerotech oven
Table of Contents

Advertisement

4APress the right scroll
and the meat probe indicator will
come on and the display will show
148.
4BPress the select
The display will then flash
6 Press select to confirm:
the meat probe indicator will remain
on
the display will alternate between
the set temperature and the internal
temperture of the meat.
Tips for using the meat probe
You can still use the timer when the meat probe is in use.
You cannot use the meat probe with Automatic cooking.
The internal temperature of the meat will continue to rise by 35-45°F / 2-8°C after you
have removed it from the oven, so allow for this in your calculations. Cover with foil and
let it rest for 15 to 20 minutes.
If you wish to remove the meat from the oven (eg basting), unplug the meat probe from
the socket but do not remove it from the meat. The display will show -- . When you are
ready to resume cooking, re-insert the probe plug into the socket and the display will
will alternate between the preset and current internal temperature of the meat.
IMPORTANT!
Use only the meat probe supplied with your oven, purchased from your Fisher &
Paykel dealer or replaced under warranty by your nearest Fisher & Paykel Authorized
Repairer.
Hold the meat probe at the handle when inserting and removing it from food and the
meat probe socket.
Remember to remove the meat probe from the oven before you start a self-clean
cycle.
Do not store the probe in the oven.
Only use the probe with fully defrosted food.
Wash the meat probe in mild soapy water but do not immerse.
It is NOT dishwasher safe.
USING THE MEAT PROBE
button 4 times
button to confirm.

.
5 Use the scroll
required meat temperature
(eg 167
o
F / 75
o
To cancel the meat probe at any stage
Press and hold the cancel
until the display returns to the time of
day.
7AWhen the preset temperature is
reached:
a tone will sound every 15 seconds
the oven will turn off
the display will show time of day.
7BPress the cancel
the tone.
buttons to set the
C).
button
button to cancel
29

Advertisement

Table of Contents
loading

Table of Contents