Maintenance - EverFocus ENQ2200 User Manual

All manuals and user guides at all-guides.com
Press Apply to apply t
change.

5.8.3 Maintenance

M aintenance Server
Reboot: The unit is rebooted without changing any of the settings. U
by pressing Reboot button if the unit is not behaving as expected.
Restore: Resets all parameter, except the IP parameters and Daylight Saving
settings, to the original factory settings.
The unit is restarted and most current settings are r
values by pressing Restore button. The only settings saved are:
 IP setting
 DDNS setting
Default: The Default button should be used with caution. Pressing this button will
return all of the camera's settings, including the IP address, to the factory default
values. The camera will then have to be re-installed.
he setting changes or Reset to reset without saving the
38
EQN2200/2201
se this method
eset to the factory default