EverFocus ENQ2200 User Manual page 36

All manuals and user guides at all-guides.com
snapshot folders created on a user's PC.
Press Apply to apply the setting changes or Reset to reset without saving the
change.
S et Time Zone
Time Zone: Select a time zone according to where the camera is located.
Press Apply to apply the setting changes or Reset to reset without saving the
change.
Set Date/Time Manually
Date: Click the calendar and pick the date. Press << to go previous year, < to go
previous month, > to go next month and >> to go next year.
Time: Click on Hour, Minute, Seconds, am/pm; then use up arrow to increase
value and down arrow to decrease value.
Press Apply to apply the setting changes or Reset to reset without saving the
change.
Set Date/Time Sync.
Check Enable NTP checkbox to enable NTP server.
NTP server: Time automatically adjusted by synchronizing with NTP server will be
u sed as the standard time for the camera.
Press Apply to apply the setting changes or Reset to reset without saving the
change.
36
EQN2200/2201