Vox Sensitivity - 3M PELTOR PIC-100 NA User Instruction

Audio message
"Radio volume 4"
12.3. BLUETOOTH
Determines default setting of the Bluetooth
The setting offers 6 preset volume levels and silent mode (OFF).
The left indicator is red when Bluetooth
All other levels are indicated in blue.
Use (+) and (-) buttons to alter volume setting.
An audio message confirms a change.
The indicators reflect the change as showed in the table below.
After 2 seconds delay, the indicators return to user selected
channel light.
Audio message
"Bluetooth
12.4. BLUETOOTH
Determines default setting of the Bluetooth
level. The setting offers 6 preset volume levels and silent mode
(OFF). The left indicator is red when Bluetooth
is Off. All other levels are indicated in purple.
Use (+) and (-) buttons to alter volume setting.
An audio message confirms a change.
The indicators reflect the change as showed in the table below.
After 2 seconds delay, the indicators return to user selected
channel light.
Audio message
"Bluetooth
volume 4"
12.5. BATTERY STATUS
An audio message will announce current battery status based on
the percentage remaining.
A warning message is announced for low battery during normal
device operation. The message will be repeated in intervals.
Audio message
"Battery status xx%"
12.6. EARTIP SELECTION
This setting shall correspond to the current installed eartip: CCC,
UltraFit™ (Small, Medium and Large), Skull Screw™.
Use (+) button to alter setting.
Audio messages report ea
This setting is used by the SCU when the real-time fit test is
performed.
Audio message
Eartip model
FP3881REVA_6sidedcover_32sidedinserts_4 x 6_2022-08-24.indd 15 FP3881REVA_6sidedcover_32sidedinserts_4 x 6_2022-08-24.indd 15
Indicators
CALL VOLUME
®
call volume level.
®
call volume is Off.
®
Indicators
call volume 4"
®
STREAMING VOLUME
®
streaming volume
®
streaming volume
®
Indicators
Streaming
®
Indicators
None
Indicators
None
12.7. BLUETOOTH PAIRING
®
Use (+) and (-) buttons to turn pairing on or off.
Pairing is started when pairing mode is on and SCU serial number
is selected from within the phone's or Bluetooth
settings.
Thereupon the Bluetooth device is paired and also connected.
®
If Bluetooth device is disconnected, then it remains paired.
®
Audio message
"Bluetooth pairing on" when
®
pairing mode is activated
"Bluetooth pairing off" when
®
pairing mode is deactivated
"Device connected" when
Bluetooth device is
®
connected
"Device disconnected" when
Bluetooth device is
®
disconnected
When in pairing mode, status
LED (1) quickly blinks blue.
Once paired, status LED will
double-blink blue, then stay
on for 4 seconds.
After 4 seconds, status LED
turns off (or resumes activity
prior to pairing).

12.8. VOX SENSITIVITY

Adjust sensitivity levels of voice activated transmission. You can
choose between low, medium or high.
When the level is high it is easier to transmit.
Use (+) button to alter volume setting.
An audio message confirms a change.
Audio message
"VOX sensitivity: low" None
"VOX sensitivity: medium"
"VOX sensitivity: high"
12.9. DELETE ALL PAIRED DEVICES
This function is used when you want to delete all paired devices.
An audio message is announced when entering the menu.
Use the (+) button to accept deletion. Device reboots automatically.
Use the (-) button to decline.
Audio message
"Delete all paired devices" None
"All paired devices deleted"
EN
radio's menu
®
Indicators
1
Indicators
Indicators
15
2022-08-24 08:30:29 2022-08-24 08:30:29