3M PELTOR PIC-100 NA User Instruction page 11

Professional in-ear communication headset
Table of Contents

Advertisement

Available languages

Available languages

NOTE: Make sure to put the earplug marked "R" into your right ear
and the earplug marked "L" into your left ear.
The marking is found on the earpiece stem side.
4. Place the earhooks over each ear (left earplug earhook over
left ear and right earplug earhook over right ear).
NOTE: Earhooks are shipped in a preformed shape like above.
You may need to adjust the shape before placing them on your
ears.
FP3881REVA_6sidedcover_32sidedinserts_4 x 6_2022-08-24.indd 9
FP3881REVA_6sidedcover_32sidedinserts_4 x 6_2022-08-24.indd 9
This description begins with the right ear.
5. Grasp the earpiece. Insert the rounded eartip into ear canal
while pulling the ear outward away from the head and upward
with the opposite hand. TWIST while inserting for best noise
reduction.
CAUTION: Hearing protection and radio communication
performance of the device depends on the proper insertion of the
earplugs into the correct ear.
6. Mold the earhook gently around the back of your ear until it
feels comfortable and secure. If needed, adjust the earplug to
ensure best noise reduction.
7. Repeat this procedure for the left ear.
EN
9
2022-08-24 08:30:27
2022-08-24 08:30:27

Advertisement

Table of Contents
loading

Table of Contents