Installing And Adjusting The Cinewide Anamorphic Lens; Anamorphic Lens Mounting Assembly - Exploded View - Runco RS 440LT/CineWide User Manual

If you are installing an RS-440LT/CineWide, proceed as follows to install and adjust the
anamorphic lens.
It is extremely important that the primary lens is properly
Note
adjusted before you install the anamorphic lens. Ensure that
the image from the primary lens is perfectly centered on the
screen.
The CineWide anamorphic lens mount kit consists of everything shown in Figure 3-17.
Some components shipped with your projector may differ slightly from what is shown in
these instructions.
3 Height/Pitch
Adjustment
Screw,
4-40 x 1/4"
(4x)
4 Swell
Latch
Assembly
(2x)
Figure 3-17. Anamorphic Lens Mounting Assembly - Exploded View
Runco RS-440 Installation/Operation Manual
1 Anamorphic Lens
2 Washer (4x)
5 Anamorphic Lens
Mounting Bracket
6 Anamorphic Lens
Base Plate
33
Installation
3.11
Installing and
Adjusting the
CineWide Anamorphic
Lens