Installation; Remote Control; Notes On Batteries - Runco RS 440LT/CineWide User Manual

To install batteries in the remote control:
1. Press down the tab on the cover and pull
the cover in the direction of the arrow.
2. Insert the included batteries. Ensure that
the polarities correctly match the
markings inside the battery
compartment.
3. Insert the lower tab of the cover into the
opening, and press down the cover until it
clicks in place.
• Make sure that the battery polarities are correct when installing the batteries.
• Do not mix an old battery with a new one or different types of batteries.
• If you will not use the remote control for a long time, remove the batteries to avoid
damage from battery leakage.
Runco RS-440 Installation/Operation Manual
and
11

3. Installation

3.1

Remote Control

Notes on Batteries