Notes On Remote Control Operation - Runco RS 440LT/CineWide User Manual

Installation
Notes on Remote Control
Operation
➤
The remote control can be used to control the projector within the ranges shown in Figure
3-1.
Figure 3-1. Available Range of the Remote Control
Note
• For best results, hold the remote control within 23 feet (7m) of the back or top sensor
and aligned within 30°.
• Do not drop the remote control or expose it to moisture or high temperature.
• The remote control may malfunction under a fluorescent lamp. If that occurs, move the
projector away from the fluorescent lamp.
• Make sure that there is nothing obstructing the infrared beam between the remote
control and the IR receiver on the projector.
• If the effective range of the remote control decreases, or it stops working, replace the
batteries with new ones.
• Ambient conditions may possibly impede the operation of the remote control. If this
happens, point the remote control at the projector, and repeat the operation.
The signal from the remote control can be reflected by the screen
or other surfaces.
12 Runco RS-440 Installation/Operation Manual