Rgb Connections - Runco RS 440LT/CineWide User Manual

RGB Connections: Connect your personal computer or other RGB source (DVD player
or HD set top box) to the DVI-I input; see Figure 3-10.
VGA
Figure 3-10. RGB Connections
1. Refer to Computer Signal Compatibility on page 67 for a list of
Note
computer signals compatible with the RS-440. Use with signals
other than those listed may cause some functions not to work.
2. Some Macintosh computers may require a Macintosh video
adapter. Contact your nearest authorized service center or dealer.
3. This RS-440 may not be able to display images from notebook
computers in simultaneous (CRT/LCD) mode. Should this occur,
switch the notebook computer to "CRT only" mode. If you are
unsure how to do this, refer to your notebook computer's user
manual.
Runco RS-440 Installation/Operation Manual
DVI to VGA
Adapter
VGA to VGA
Cable
Personal
Computer
DVI to DVI
Cable
DVI
25
Installation