Roland VS-2400CD Appendices page 23

PHRASE/MARKER buttons
[PREVIOUS]
[NEXT]
[CD-RW MASTERING] + [TAP]
(*4) when PREVIOUS/NEXT Sw is "PHRASE."
(*5) when PREVIOUS/NEXT Sw is "MARKER."
Other
[SHIFT] + [CD-RW (MASTERING)]
[SHIFT] + [HOME (DISPLAY)]
[SHIFT] + [UNDO (REDO)]
[SHIFT] + [TAP]
[SHIFT] + [NUMERICS (EXT SYNC)]
[SHIFT] + [LOOP]
[SHIFT] + [AUTO PUNCH]
[SHIFT] + [MASTER EDIT (VGA↔LCD)]
[SHIFT] + [ ] [ ]
[SHIFT] + [ ] [ ]
[SHIFT] + TIME/VALUE dial
[SHIFT] + [SOLO]
[SHIFT] + [MUTE]
[SHIFT] + [EZ ROUTING]
[SHIFT] + [AUTOMIX]
[SHIFT] + [CH EDIT]
[HOME] + The VS-2400CD turn on
[CLEAR] + Fader
[SHIFT] + (CH PARAMETER) [PAN]
If there is a phrase at the current location, move to the beginning of that
phrase. (*4)
If not, move to the end of the previous phrase. (*4)
Move to the previous marker. (*5)
If there is a phrase at the current location, move to the end of that phrase. (*4)
If not, move to the beginning of the next phrase. (*4)
Move to the next marker. (*5)
Register a marker for audio CD track number
To Mastering Room setting screen
Switch the Graphic display (Home Condition)
Redo function (when the UNDO indicator is lit)
To the Tempo map setting screen
To the Sync parameter settings screen
To the loop start/end point setting screen
To the punch in/out point setting screen
Switch the operation display
Zoom to change the number of tracks appearing in the playlist display.
Change of the time axis display width of the playlist.
Modify the value at 10 times the usual speed. When adjusting the channel level
and AUX Send level, value is changed per 0.1 dB. In Play condition when the
cursor is displayed at the sub frame of the time code display, move the current
time in units of approximately 1/100 frame.
All solo mode is turned off
All mute mode is turned off
To the PATCH BAY (and phantom power sw) screen
To the Automix screen
Adjust each channel fader to set the channel level to "0 dB," and the PAN
knobs to "Center."
Select the LCD as the main display.
Temporarily unlink the fader from its group so you can adjust its level
independently.
To the RSS PAN setting screen
Shortcut Key Operations
23