Vocal Multi - Roland VS-2400CD Appendices

Algorithm List

Vocal Multi

This feature provides a multi-effect suited for vocals.
fig.08-30
Input L
Noise
Suppressor
Input R
Cutting distortion in vocals
Limiter can be used to suppress signals at a High level to prevent sound distortion. To do this, follow the steps
below:
Mode (Mode):
Limiter Threshold (Thresh):
Limiter Release (Release):
Limiter Level (Level):
Cutting the sibilant sounds of a voice.
De-esser can be used to cut off sibilant sounds contained in vocal sounds to achieve softer sound quality. To do
this, follow the steps below:
Mode (Mode):
De-esser Sense (Sens):
De-esser Frequency (Freq):
Parameter (full name)
NS (Noise Suppressor):
Sw (Switch)
Thresh (Threshold)
Release (Release)
Lmt (Limiter / De-esser):
Sw (Switch)
Mode (Mode)
Thresh (Limiter Threshold)
Release (Limiter Release)
Level (Limiter Level)
ENH (Enhancer):
Sw (Switch)
Sens (Sense)
Freq (Frequency)
MixLvl (Mix Level)
Level (Level)
78
Limiter/
Enhancer
De-esser
Limiter
Sets the volume at which sound distortion starts being suppressed.
Determines the time that elapses before the input level becomes off after it drops
below the Limiter Threshold.
Decides the volume after passing through Limiter.
De-esser
Sets the degree of the De-esser effect.
Sets the frequency at which De-esser effect starts working.
Setting
Mutes noise in the silent mode.
On, Off
0–100
0–100
Suppresses signals at High levels to control distortion /
Suppresses the annoying s-consonant.
On, Off
Limiter, De-esser
0–100
0–100
0–100
Accentuates the sound and push the sound forward.
On, Off
0–100
1.0–10.0 kHz
0–100
0–100
3BAND EQ Pitch Shifter
Function
Turns the noise suppressor on or off.
Sets the level to start muting noise.
Sets the time over which the volume will drop to 0 after the
noise starts being muted.
Turns the limiter/de-esser on or off.
Selects limiter or de-esser.
Sets the volume at which sound distortion starts being
suppressed.
Sets the time until when the limiter will turn off after the input
level falls the limiter Threshold (Thresh).
Sets the volume of the limiter sound.
Turns the enhancer on or off.
Sets the degree of the enhancer effect desired.
Sets the frequency at which the enhancer effect starts working.
Sets the amount of the enhancer sound should be mixed
into the direct sound.
Sets the volume of the enhancer sound.
Output L
Delay
Chorus
Output R