Locator/Scene Buttons - Roland VS-2400CD Appendices

Shortcut Key Operations

LOCATOR/SCENE buttons

[LOCATOR] → [CLEAR] + [0]—[9]
[SHIFT] + [LOCATOR (BANK)] → [0]—[9]
[SCENE] → [CLEAR] + [0]—[9]
[SHIFT] + [SCENE (BANK)] → [0]—[9]
[CLEAR] + [TAP]
[SHIFT] + [CLEAR] + [TAP] →
[ENTER/YES]
[AUTOMIX] + [TAP (SNAPSHOT)]
[AUTOMIX] + [REC]
[SHIFT] + [4 (IN)] (*3)
[SHIFT] + [5 (OUT)] (*3)
[SHIFT] + [9 (FROM)] (*3)
[SHIFT] + [0 (TO)] (*3)
[SHIFT] + [CLEAR] + [4 (IN)]
[SHIFT] + [CLEAR] + [5 (OUT)]
[SHIFT] + [CLEAR] + [9 (FROM)]
[SHIFT] + [CLEAR] + [0 (TO)]
[A.PUNCH] + [4 (IN)]
[A.PUNCH] + [5 (OUT)]
[A.PUNCH] + [TAP]
[LOOP] + [9 (FROM)]
[LOOP] + [0 (TO)]
[LOOP] + [TAP]
[A.PUNCH] + [CLEAR] + [4 (IN)]
[A.PUNCH] + [CLEAR] + [5 (OUT)]
[LOOP] + [CLEAR] + [9 (FROM)]
[LOOP] + [CLEAR] + [0 (TO)]
(*3) If a time location has already been registered to a point, and the Global parameter EDIT POINT Sw TYPE is set to
"Same as Locator," you will jump to the time location that is registered for that point.
22
Clear the setting of locators
Switch the locator bank
Clear the setting of scenes
Switch the scene bank
Erase a marker
Erase all markers
Stores a snapshot (When Automix is "on")
Automix real time recording (when Automix is "on.")
Register the in point
Register the out point
Register the from point
Register the to point
Clear the track edit in point
Clear the track edit out point
Clear the track edit from point
Clear the track edit to point
Register the auto punch-in point
Register the auto punch-out point
Register the auto punch-in point and clear the auto punch-out point.
Register the loop-from point
Register the loop-to point
Register the loop-from point and clear the loop-to point.
Clear the auto punch-in point
Clear the auto punch-out point
Clear the loop-from point
Clear the loop-to point