Vocal Canceler - Roland VS-2400CD Appendices

Vocal Canceler

When a stereo source is being input from CD or DAT and so on, this cancels the sound which is located in the
stereo center, such as the vocal or bass.
fig.08-61
Input L
Input R
Depending on the music source, sounds that you do not wish to be canceled may be canceled as well. In
particular if the musical source has heavy reverb or if the sound that you wish to delete is not located in the
center, the vocal canceler may not produce the desired result.
Canceling the vocals alone
Vocal Canceler cancels the sound located in the center. That means it cancels sounds such as the bass and sounds
of the lead instrument along with vocal sounds. To cancel vocals only to create music for karaoke, for example,
set Range Lo to around 100 Hz and Range Hi to around 1 kHz.
Parameter (full name)
VC (Vocal Canceler):
Sw (Switch)
Balance (Balance)
RangeLo (Range Low)
RangeHi (Range High)
EQ (Equalizer)
Sw (Switch)
Low Gain (Low Gain)
Low Freq (Low Frequency)
Low Q
Low Type
Mid Gain (Middle Gain)
Mid Freq (Middle Frequency)
Mid Q (Middle Q)
High Gain
High Freq (High Frequency)
High Q
Hi Type (High Type)
Level (Output Level)
3BAND EQ
Vocal Canceler
3BAND EQ
Setting
Cancels sounds located in the center such as vocals and the bass.
On, Off
0–100
Unlimit, 20 - 2000 Hz
1.0 - 20.0 kHz, Unlimit Sets the upper limit of the frequency band to be canceled.
On, Off
-12– +12 dB
20 - 2000 Hz
0.3–10.0
Shlv, Peak
-12– +12 dB
200–8000 Hz
0.3–10.0
-12– +12 dB
1.4–20.0 kHz
0.3–10.0
Shlv, Peak
0–100
Output L
Output R
Function
Turns the vocal canceler on or off.
If the sound that you wish to cancel is not located in the
center, find the point at which it is most effectively cancelled.
Sets the lower limit of the frequency band to be canceled.
Turns the equalizer on or off.
Sets the boost/cut amount in the low frequency band.
Sets the center frequency in the low frequency band.
Sets the width of the area around the low frequency that
will be affected by the gain settings.1
Sets the type of the low frequency band equalizer
(Shlving type or peaking type).
Sets the boost/cut amount in the middle frequency band.
Sets the center frequency in the middle frequency band.
Sets the width of the area around the middle frequency that
will be affected by the gain settings.
Sets the boost/cut amount in the High frequency band.
Sets the center frequency in the High frequency band.
Sets the width of the area around the High frequency that
will be affected by the gain settings.1
Sets the type of the High frequency band equalizer (Shlving
type or peaking type).
Sets the volume after passing through the equalizer.
Algorithm List
*1
*2
*3
*3
Continued...
81