Various Settings; Returning To The Factory Settings (Factory Reset); Backing Up Data To Sd Card (Backup) - Roland TR-8S Owner's Manual

Various Settings

Returning to the Factory Settings
Here's how to return the TR-8S to its factory-set state.
1.
Press the [UTILITY] button.
The UTILITY screen appears.
2.
Use the [VALUE] knob to select
Reset."
3.
[ENTER]
Press the button.
The target selection screen appears.
Target Explanation
Returns all settings including patterns and
ALL
kits to their factory-set state.
Returns only the kit settings to their factory-
KIT
set state.
Returns only the patterns to their factory-set
PTN
state.
4.
Use the [VALUE] knob to select the target, and
[ENTER]
press the button.
A confirmation message appears.
5.
To execute, use the [VALUE]
and press the [ENTER]
If you decide to cancel, use the
and then press the [ENTER]
6.
When the display indicates
power." turn the TR-8S's power off and on again.
22
(FACTORY RESET)
"UTILITY: Factory
knob to select "OK,"
button.
[VALUE] knob to select "Cancel,"
button.
"Completed. Turn off
Backing Up Data to SD Card
* If you want to make a backup, save the data (patterns, kits, system
settings) before you proceed. The backup will not include the pattern
or kit that you're currently editing (shown by an
system settings that you have not saved.
1.
Press the [UTILITY] button.
The UTILITY screen appears.
2.
Use the [VALUE] knob to select
3.
[ENTER]
Press the button.
The BACKUP:NAME screen appears.
MEMO
If a backup file already exists, the BACKUP:SELECT screen
appears.
To overwrite-save, select the existing backup file and press the
[ENTER]
button.
If you select Save As and press the
BACKUP:NAME screen appears.
4.
Edit the name if necessary.
5.
Press the [ENTER] button.
A confirmation message appears.
6.
To execute, use the [VALUE]
and press the [ENTER]
If you decide to cancel, use the
[ENTER]
and then press the
(BACKUP)
"*" indication) or
"UTILITY: Backup."
[ENTER] button, the
knob to select "OK,"
button.
[VALUE] "Cancel,"
knob to select
button.