Chapter 4 Setting The Metronome; Switching The Click On/Off; Tempo Adjustment; Setting The Way The Click Sounds - Roland TD-6V Owner's Manual

Chapter 4 Setting the Metronome

Parameters That Can Be Set Here
fig.04-001.e
CLICK (Click Settings) (p. 80)
Click Level
Time Signature
Interval
Inst
Pan
Play Count In
Rec Count In
Switching the Click On/Off (Click)
You can switch the click sound on and off by pressing [CLICK].
[CLICK] lights while the click sound is set to be played.
fig.04-002.e
Click is played Click is not played
Lit
Click cannot be used in GM mode (p. 99).
Tempo Adjustment (Tempo)
For each song selected, the tempo of the click changes to the
tempo specified for that song.
1. Press [CLICK].
[CLICK] lights, and the click sound begins to play.
2. While holding down [SHIFT], press [CLICK
(TEMPO)].
The "TEMPO" screen appears.
fig.04-003_50
3. Press [+] or [-] to select the tempo.
4. When you finish making settings, press [EXIT]
to end the procedure.
The "TEMPO" screen disappears.
Unlit
fig.04-004_50
TEMPO: 20–260
Setting the Way the Click
Sounds
Settings that determine how the click sounds, volume, time
signature etc.
1. Confirm that [EDIT] is not lit.
If this lights, press [KIT] or [SONG] to extinguish it.
2. Press [CLICK].
[CLICK] lights, and the click sound begins to play.
3. Press [EDIT].
4. Press [
] or [ ] to select the parameter you
wish to edit.
fig.04-005ai.e
Parameter to set
5. Press [+] or [-] to make the setting.
fig.04-006ai.e
6. When you finish making settings, press [KIT] or
[SONG] to end the procedure.
Volume Adjustment (Click Level)
Adjusts the volume of the click sound. Raising the value will
increase the volume. With a setting of "0," no sound is
produced.
fig.04-007_50
Click Level: 0–127
(Click Edit)
Value
79