Changes In Midi Filter Parameter; Changes In Global Screen; Prevent The Hard Disk From Being Formatted (Hd Format Protect Parameter); Adjusting The Volume Of The Entire Sampler - Roland MV-8000 Owner's Manual

Changes in the others

Changes in MIDI Filter parameter

Parameter Before
PC On
Bank On

Changes in GLOBAL screen

Prevent the hard disk from being formatted
(HD Format Protect parameter)
The HD Format Protect parameter lets you allow or prevent formatting of the hard
disk. When you turn on the power of MV-8000, this will automatically be turned On.
If the HD Format Protect parameter is On, it will not be possible to format the hard
disk. If you want to format the hard disk, turn HD Format Protect to the "Off" setting.
1
Press .
The SYSTEM MENU screen will appear.
2
Press (Global).
The GLOBAL screen will appear.
3
Sets the HD Format Protect parameters.
HD Format Explanation
Protect
You will be able to format the hard disk. If you want to format the hard disk,
Off
select the "Off" setting.
You will not be able to format the hard disk. Normally, you should leave this
On
at the "On" setting.
If you attempt to format the hard disk when the HD Format Protect parameter is On,
a message of "Can't Format the Hard Disk. HD Format Protect is On." will appear.

Adjusting the volume of the entire sampler

You can adjust the playback volume of the entire sampler at the "Sampler Output
Gain" parameter. Adjust the parameter when you feel that the playback volume of
sampler is insufficient in spite of having adjust the level of partials and audio phrases.
1
Press .
The SYSTEM MENU screen will appear.
2
Press (Global).
The GLOBAL screen will appear.
3
Sets the Sampler Output Gain parameter.
Range: -12, -9, -6, -3, 0 (dB)
78
After
Off
Off
The playback volume of the
sampler is set lower than the
listening volume of sampling
on the MV-8000, beforehand,
to prevent the sound causing
distortion by the polyphony
and the setting of the filter on
the sampler.