Roland MV-8000 Owner's Manual page 64

Changes in Mixdown and Mastering
5
Press
The EDIT MASTERING FILE NAME popup will appear.
6
Specify a filename.
A default filename is assigned automatically. You can change this if desired.
7
Press (OK).
The REC indicator (red) will blink, and the MV-8000 will be in mastering-standby.
8
Press .
Mastering will begin you selected file in step 3. REC indicator (red) and PLAY
indicator (green) will lit.
9
To stop the mastering, press
Mastering will end, and the mastering file will be saved in the MASTERTR folder
([REC] and [PLAY] indicator will be dark).
"Mixdown finished. Go to CD Burning?" message will appear.
F-button
(No)
(Yes)
64
.
.
Action
You will return to the MASTERING screen.
You will go to the CUE SHEET screen.
If you press [EXIT] in step 7,
the EDIT MASTERING FILE
NAME popup window will
close without entering standby
mode.
If you specified mixdown
filename is onto a MASTERTR
folder that already contains
setting, "That name already
exists. Overwrite?" message
will appear.
If you press [F1 (No)], you can
edit filename again.
If you press [F5 (Yes)], the
previous data will be
overwritten.
If you operate the mastering
effects during mastering, your
changes will reflected in the
mastering data.
If playing reaches to the end of
selected file in step3, mastering
will stop automatically.