Changes In Sampling And Importing; Sampling - Roland MV-8000 Owner's Manual

Changes in Sampling and Importing

Sampling

The sampling procedure and specifications have been changed. The changes are as
follows.
• The SAMPLING screen will appear immediately when you press [SAMPLING].
The SAMPLING screen will appear without the SAMPLING MENU screen being
displayed first. This allows you to begin recording immediately. Check the sample
assignments in the RESULT screen before you make settings.
• The number of samples divided by the Auto Divide function has changed from 16 to
96.
• You can now choose the sample preview (audition) method in the RESULT screen.
1
Press .
The SAMPLING screen will appear.
fig.sampling-screen
2
Set the parameters for sampling.
• Sample Type
Specifies the number of channels that will be sampled.
Range Explanation
Mono Monaural (one channel)
Stereo Stereo (two channels)
• Input Select
Selects the input source for sampling or recording.
Range Explanation
Analog Analog input from the PHONO connectors or MIC/LINE connectors.
Coaxial Coaxial digital input
Optical Optical digital input
R-BUS Digital input from R-BUS (channels 1 and 2)
• Start Trigger
Specifies how sampling will begin.
Range Explanation
Manual Sampling will be started manually.
Level Sampling will be triggered by the input level.
Pad Sampling will begin when you strike a pad.
Play Sampling will begin when you play back the sequencer.
• Level
Specifies the response level when using the input level to start sampling.
Range: -36, -24, -18, -12, -8, -4 dB
29