Combining Multiple Midi Tracks Into One (Merge Tracks) - Roland MV-8000 Owner's Manual

Combining multiple MIDI tracks into one
(Merge Tracks)
This command combines the performance data from multiple adjoining MIDI tracks
into one track. This is convenient when you have run out of MIDI tracks, or if you
recorded several drum tracks separately and want to combine them into a single track.
1
Press .
The SEQUENCE screen will appear.
2
Press .
SEQUENCE MENU popup will appear.
3
Use to move the cursor to "Merge Tracks" then press
The MERGE TRACKS popup will appear.
fig.quick-region
4
Specify the parameters.
• Source From
Specify the track number of the first track you want to merge.
Range: 1–Current track–136
• Source To
Specify the track number of the end track you want to merge.
Range: 1–Current track–136
• Merge To
Specify the destination in which the merged data will be placed.
Range Explanation
A new track will be created, and the merged data will be placed in it.
New
1–136 The merged data will be placed in the track whose number you specify.
• Keep Source Tracks
This specifies whether the tracks specified by Source From/To will be kept.
Range Explanation
Delete the performance data specified from Source From track to Source To
Off
track.
On Remain the performance data.
5
Press (Execute).
The Merge Track operation will be executed. The performance data of the MIDI tracks
between Source From and Source To will be combined and placed in the Merge To
track.
Changes in recording and editing sequences
.
Audio track data cannot be
merged.
57