Changes In Mixdown And Mastering; Mixdown - Roland MV-8000 Owner's Manual

Changes in Mixdown and Mastering

Mixdown

1
Press
The MASTERING MENU screen will appear.
2
Press (Mixdown) or use
then press
If Mixdown mode is off, the display will ask "Enter Mixdown Mode. Are you sure?"
F-button Action
Cancels the procedure, and returns to the MASTERING MENU
(No)
screen.
Turns Mixdown mode on. You will
go to the SEQUENCE screen, which
will indicate "** Mixdown Mode **."
(Yes)
Continue to step 3.
3
Turn to MAX.
This lets you mixdown without reducing the volume.
4
Press
The EDIT MIXDOWN FILE NAME popup will appear.
5
Specify a filename.
A default filename is assigned automatically. You can change this if desired.
6
Press (OK).
The REC indicator (red) will blink, and the MV-8000 will be in mixdown-standby.
7
Press .
Mixdown will begin. REC indicator (red) and PLAY indicator (green) will lit.
62
.
to select the "MIXDOWN MODE" icon
.
.
You can start the mixdown
from any time location. Simply
move the current time to that
point, and then start the
mixdown.
If Mixdown mode is on, the
display will ask "Exit
Mixdown Mode. Are you
sure?"
If you mix down without
setting the MASTER knob to
MAX, the volume will be
lower. You should leave this
knob at MAX unless you are
creating a fade-in or fade-out.
If you operate the mixer or
effects during mixdown, your
changes will be reflected in the
mixdown data.
If you press [EXIT] in step 6,
the EDIT MIXDOWN FILE
NAME popup window will
close without entering standby
mode.
If you specified mixdown
filename is onto a
MIXDOWNTR folder that
already contains setting, "That
name already exists.
Overwrite?" message will
appear.
If you press [F1 (No)], you can
edit filename again.
If you press [F5 (Yes)], the
previous data will be
overwritten.