Axq: Aux Send Request - Roland M-400 Reference Manual

AXQ: AUX send request

Function Requests the AUX send level and AUX pan settings for CH1–48 or MAIN.
Syntax stxAXQ:a,b; (Command syntax: type 2)
a: Channel selection (I1–I48, MAL, MAR or U1–U24)
b: AUX channel selection (AX1–AX16)
<Ex.> stxAXQ:I1,AX3;
Requests the AUX3 send level and AUX pan setting for CH1.
Command returned by the M-400
Syntax stxAXS:a,b,c,d; (Command syntax: type 2)
a: Channel number (I1–I48, MAL, MAR or U1–U24)
b: AUX channel number (AX1–AX16)
c: AUX send level (INF, -80.0–10.0) *0.1 dB steps
d: AUX pan (L63–C–R63) *Steps of 1
<Ex.> stxAXS:I1,AX3,-6.5,C;
Reports that for CH1, the AUX3 send level is -6.5 dB and the AUX pan is at center.
Note: If you select an AUX channel that is not stereo-linked, the M-400 will return "0" as the value of the AUX pan.
Note: If you select the MAIN channel, the same AUX send level value will be returned for L or R, since the MAIN L/R
channels are stereo-linked. AUX pan can be specified individually for L and R.
Note: If you select a stereo-linked input channel, the same AUX send level value will be returned for both L and R. AUX
pan can be requested individually for L and R.
Note: If you specify the following parameters, the M-400 will return an ERR command (stxERR:5;) and will ignore your
command.
• If you specify AX1–AX16 or DCA1–DCA8
• If you specify U1–U24 that is assigned to the above
Command details
21