Settings On The Control Computer; Settings On The M-400 - Roland M-400 Reference Manual

Settings on the control computer

1
Communication settings on the computer
Communication method
Communication speed
Parity
Data length
Stop bit
Code set
XonXoff
* For details on how to set the communication settings, refer to the owner's manual of the computer you're using.

Settings on the M-400

When you power up the M-400, the communication speed will be set to 115200 bps by default.
If you're using the M-400 via RS-232C, you'll need to set its communication speed to match the setting of the
computer.
For details on how to set this, refer to the M-400 owner's manual.
Synchronous (asynchronous), full-duplex
4800 / 9600 / 14400 / 31250 / 38400 / 57600 / 115200 bps
You can select this as desired, but it must be the same as the setting
on the M-400.
none
8 bit
1 bit
ASCII
on
Setup
7