Panel Descriptions; Front Panel - Roland CG-8 User Manual

Panel Descriptions

Front Panel

fig.frontpanel.eps
1
35
34
33
32
1.
D-BEAM
You can apply a variety of effects to the image by moving
your hand above this. → p. 37, p. 68, p. 79
2.
D-BEAM indicator
This will light when the D Beam is responding.
→ p. 37, p. 68, p. 79
3.
STROBE button
If you press this (button lit) and place your hand over the
D Beam, the image will stop momentarily. → p. 37
4.
ASSIGNABLE button
If you press this (button lit) and place your hand over the
D Beam, the effect specified for each patch will be applied.
→ p. 38
14
2 3 4
31 30 29 28
5 6 7 8 9 10 11
27 26 25 24 23
5.
REC button
This button records movements of the parameter knobs,
XY pad, and D Beam for ten seconds. Recording will
begin when you press the button (lit red).
→ p. 39
6.
GRAB MOTION switch
This plays back the parameter knob, XY pad, and D Beam
movements you recorded using the [REC] button.
LOOP:
OFF:
1-SHOT: The recorded movement will play. When you
→ p. 39
12 13
22 21
The recorded movement will play repeatedly.
The patch will play normally.
release your hand from the switch, it will
return to the [OFF] position and the patch will
play normally.
14
15
16
17
18
19
20