Selecting A Stamp Patch To Layer On The Image; Selecting A Stamp Patch - Roland CG-8 User Manual

Selecting a Stamp Patch to layer on the image

Next we'll select a "Stamp Patch" image for the foreground, and layer it onto the
background. You will use this mainly for a logo or text that explains the background.

Selecting a Stamp Patch

fig.front05.e.eps
1
Press the [STAMP PATCH] pad.
The [STAMP PATCH] pad will light.
Of the visual pads [1]–[16], the pads to which a Stamp Patch has been saved will light.
2
Press one of the lit visual pads [1]–[16] to select a patch.
The selected Stamp Patch will begin playing. The display panel will indicate the bank
and number of that Stamp Patch.
Switching banks and selecting a Stamp Patch
1
Hold down the [STAMP PATCH] pad and press a visual pad [1]–[8] to switch banks.
While you continue holding down the [STAMP PATCH] pad, the visual pad of the
currently selected bank number will blink.
2
When you take your finger off the [STAMP PATCH] pad, visual pads [1]–[16] in
which a Stamp Patch is saved will light.
3
Press one of the lit visual pads [1]–[16] to select a patch.
The selected Stamp Patch will begin playing. The display panel will indicate the bank
and number of that Stamp Patch.
[STAMP PATCH] pad
Visual pads [1]–[16]
Basic operation
For details on creating and
saving a Photo Patch, refer
to "Creating a Stamp
Patch" (p. 73).
The Stamp Patch will not
change if you press a
visual pad that is not
illuminated (i.e., a pad to
which no Stamp Patch has
been assigned).
33