Panel Descriptions; Top Panel - Roland Jupiter-Xm Reference Manual

Panel Descriptions

Top Panel

1 2
13
A
* Some controllers are not operable in some modes. For details, refer to
1
VOLUME
[VOLUME] knob
Adjusts the overall volume.
[SL1] [SL2] slider
Control the parameters that are assigned to the sliders.
[S1] [S2] [S3] buttons
Control the parameters that are assigned to the buttons.
2
I-ARPEGGIO
[TYPE] knob
Selects the arpeggio type.
[RHYTHM] knob
Selects the type of rhythm.
[TEMPO] knob
Sets the tempo of the arpeggio.
[HOLD] button
Turns the arpeggio hold function on/off.
When arpeggio hold is on, the pitch of the last-played key is held.
[ON/OFF] button
Turns the arpeggio function on/off.
PLAY DETECTOR [KEYS] button
When this is on, the arpeggio scale changes according to the keys that
you press.
PLAY DETECTOR [BEAT] button
When this is on, the arpeggio pattern changes according to the timing
at which you play the keys.
3
4
10
"Correspondence Between Controllers and Parameters"
5 6
8
11
3
OSC
[TYPE] knob
Selects the oscillator waveform.
[PITCH] knob
Adjusts the pitch of the oscillator.
[LEVEL] knob
Adjusts the volume of the oscillator.
[MOD] knob
Adjusts the depth of modulation.
[RING] button
Produces a metallic tonal character by multiplying OSC1 and OSC2.
Use the [MOD] knob
[SYNC] button
Creates a complex waveform by forcibly restarting OSC1 in
synchronization with the cycle of OSC2.
[XMOD] button
Specifies the amount by which the OSC2 waveform varies the
frequency of OSC1. Use the
change.
4
LFO
[TYPE] knob
Selects the LFO waveform.
[RATE] knob
Specifies the LFO's modulation speed.
[FADE TIME] knob
Specifies the time from when the tone sounds until the LFO reaches its
maximum amplitude.
7 9
(p. 16).
to adjust the amount of change.
[MOD] knob to adjust the amount of
12
3