Saving A Photo Patch (The Save Operation) - Roland CG-8 User Manual

Creating patches

Saving a Photo Patch (the Save operation)

The changes you make to a Photo Patch are temporary; they will revert to the original
settings when you switch to a different Photo Patch.
If you want to keep the changes you make, you must perform the Save operation.
fig.front23.e.eps
1
Make sure that the [PHOTO PATCH] pad is lit, and press the [SAVE] button.
The button will light red.
2
Press a visual pad [1]–[16] to specify the Photo Patch number in which you want to
save your settings.
The [SAVE] button will go out.
Saving a Photo Patch in another bank
1
While holding down the [PHOTO PATCH] pad, press a visual pad [1]–[8] to switch
banks, then release the [PHOTO PATCH] pad.
2
Press the [SAVE] button.
The button will light red.
3
Press a visual pad [1]–[16] to specify the Photo Patch number in which you want to
save your settings.
The [SAVE] button will go out.
72
[SAVE] button
If you want to cancel this
operation after pressing
the [SAVE] button, simply
press the [EXIT] button.