Roland CG-8 Supplementary Manual

MIDI implementation

Model: CG-8 Version: 1.0.0
Symbol Item
n: MIDI channel
vv: Control value,
Velocity value, etc.
kk: Note number
xx: Switch on and off
1. Receiving data
■ Channel Voice Message
● Note On
Status Second
9nH kkH
* Received only when V-LINK is ON and the note mode is "specify pitch."
* Selects the patch that corresponds to the note number.
* Assigned starting with the lowest note, with bank 1 patch number 1 through
patch number 16 of the last bank as one set.
● Control Change
* In addition to Control Changes, System Exclusive messages can also be used to
make settings for a variety of controls. (The settings are not remembered.)
* Reception assignments and transmission assignments are shared.
* You can assign Control Changes to the following functions.
• PHOTO/STAMP SWITCHING
• STROBE
• FADE
• TRIGGER RESET
• VALUE INC
• VALUE DEC
• CONTROL X
• CONTROL Y
• CONTROL Z
• CONTROL COLOR
• CONTROL SPEED
• MODULATION TYPE
• MODULATION RATE
• MODULATION DEPTH X
• MODULATION DEPTH Y
• MODULATION DEPTH Z
• MODULATION DEPTH COLOR
• MODULATION DEPTH SPEED
• EFFECT BANK NUMBER
• EFFECT PROGRAM NUMBER
• PICTURE NUMBER
* Assignable Control Changes are CC#1–31, 33–120.
Setting range
0H-FH (ch.1 - ch.16)
00H-7FH (0 - 127)
(Only when the item is the Note On
Velocity, the setting range is "01H-7FH
(1 - 127)".)
00H-7FH (0 - 127)
00H-3FH (0 - 63): OFF
40H-7FH (64 - 127): ON
Third
vvH
❍Bank Select (Controller Number 0, 32)
Status Second
BnH 00H
BnH 20H
mm, ll = bank number: 00 00H - 7F 7FH (bank.1 - bank.16384)
* Specifies the patch bank.
* When the unit receives an unselectable Bank Select message, the message is
ignored, and the unit receives only a Program Change message.
* The received Bank Select message is kept until the unit receives a Bank Select
message again.
* Select the corresponding Patch/Bank. The Patch/Bank that correspond to the
Bank Select messages are as follows:
———————————————————————————————————
Bank Select
MSB LSB
———————————————————————————————————
00H 00H
01H 00H
02H 00H
03H 00H
04H 00H
05H 00H
06H 00H
07H 00H
———————————————————————————————————
❍Modulation (Controller Number 1)
Status Second
BnH 01H
* By default, controls the modulation type.
0: Sine
1: Triangle
2: Square
3: Ramp
4: Random
5: Sound 1
6: Sound 2
7: Sound 3
❍Breath type (Controller Number 2)
Status Second
BnH 02H
* OFF by default.
❍Foot type (Controller Number 4)
Status Second
BnH 04H
* OFF by default.
❍Portamento time (Controller Number 5)
Status Second
BnH 05H
* By default, selects a picture.
For photo patches: vv = 0-47
For stamp patches: vv = 0-15
❍Main volume (Controller Number 7)
Status Second
BnH 07H
* OFF by default.
Date: May 1, 2005
Third
mmH
llH
Program No. Bank/Patch
00H-0FH Bank 1/Patch 1-16
00H-0FH Bank 2/Patch 1-16
00H-0FH Bank 3/Patch 1-16
00H-0FH Bank 4/Patch 1-16
00H-0FH Bank 5/Patch 1-16
00H-0FH Bank 6/Patch 1-16
00H-0FH Bank 7/Patch 1-16
00H-0FH Bank 8/Patch 1-16
Third
vvH
Third
vvH
Third
vvH
Third
vvH
Third
vvH
1