Before you begin
About the card adaptor
Use the included card adaptor to load image files from a digital camera or computer.
* The card adaptor is only for use with the CG-8. Don't use it with a conventional computer.
* Don't remove the CompactFlash card while data is being loaded from the card. Doing so may
destroy the data on the CompactFlash card.
* Don't connect more than one card adaptor simultaneously.
* CompactFlash cards are not included with the CG-8. You will need to obtain them separately.
Connecting the card adaptor
Make sure that the CG-8's power is switched off, then connect the card adaptor to the
rear panel [OPTION] connector as shown below.
fig.Card02.e.EPS
Card adaptor
18
930
Don't connect or
disconnect the card
adaptor while the CG-8 is
powered up.