Table of Contents
Advertisement
B
Turn off the printer, and remove
all cables and cords from the
printer.
C
Remove the adhesive tape.
D
If the duplex unit is already in-
stalled, open the duplex unit by
lifting the catch.
E
Open the right cover by lifting the
catch.
F
If the cover of the interchange unit
is attached, remove it by sliding it
out toward the back of the printer.
Note
❒ If the cover of the interchange
unit is already removed, go to
step G.
❒ The removed cover is no longer
required.
ZAEP440E
G
Hold the mailbox on both sides
and insert it into the printer from
the top side of the printer.
ZAEP330E
H
Fasten the two screws by hand
and secure the mailbox to the
printer. Use a coin to fasten the
screws securely.
ZAEP271E
Installing Options
2
ZAEP710E
ZAEP340E
ZAEP350E
39
Advertisement
Table of Contents
