Quitting The Forwarding Function; Forwarding Mark - Ricoh Aficio 1515 Facsimile Reference Manual

Key Operator Setting
Note
If there is an End Receiver already
programmed, a receiver name is
shown. If you want to change the
receiver, press the {Clear/Stop}
key and proceed to step F.
To cancel Forwarding, press the
{Cancel} key and proceed to
G
step
F
Specify an End Receiver using the
Quick Dial key or searching by
the destination list, and then
press the {OK} key.
See p.34 "Searching for a Destina-
tion", Facsimile Reference <Basic
Features>.
G
Press the {User Tools/Counter} key.
The standby display appears.

Quitting the forwarding function

7
A
Press the {User Tools/Counter} key.
ABZ118S.eps
B
Select [Fax Features] using {U} or
{T}, and then press the {OK} key.
FAX659.tif
C
Select [Key Operator Tools] using
{U} or {T}, and then press the
{OK} key.
FAX660.tif
74
.
D
Select [Forwarding] using {U} or
{T}, and then press the {OK} key.
FAX703.tif
E
Select [Off], using {U} or {T}, and
then press the {OK} key.
FAX705.tif
F
Press the {User Tools/Counter} key.
The standby display appears.

Forwarding Mark

You can print a Forwarding Mark on
the receiver's messages that have
been forwarded.
The receiver can distinguish between
forwarded messages and usual recep-
tions.
Note
You can specify whether or not to
print a Forwarding Mark in the
User Parameters. See p.76 "User
Parameters" (switch 02, bit 0).
Gfmten0e.eps