Table of Contents
Advertisement
HMI Display Operation and Identification
•
Shot Time: To show the dispense time for current
one shot.
•
Shot Vol: To show the dispense volume for current
one shot.
•
Purge Vol: To show the current one shot volume of
purging.
•
BasePurge Vol: To show the current one shot
volume of base purge.
Function icons
Press 'F1' or select the icon to display
System Main Screen, page 25.
Home: Press 'F2' or select the icon to
execute the command of returning to home
point.
Press 'F5' or select the icon to display
Maintenance Screen, page 22.
Press 'F6' or select the icon to display Error
Message Screen, page 23.
Reset: This icon appears when alarms are
activated. Press 'F7' or select to display
current alarm message. On the current
alarm message screen, select this icon to
clear the alarms. Only reset alarms can be
cleared.
Press 'F8' or select the icon to display
Signal Check Screen (Auto), page 23.
22
Maintenance Screen
F
. 11 Maintenance Screen
IG
On the Maintenance Screen, press 'F1' or select
display the Automatic Main Screen.
Maintenance Screen records the workload data of
important parts. Some data can be reset. Click at the
part clear buttons and confirm the execution to reset
workload data.
•
Output count clear: Clear the workload of dispense
valve.
•
Input count clear-A: Clear the workload of inlet
valve A.
•
Input count clear-B: Clear the workload of inlet
valve B.
•
Output count clear-A: Clear the workload of outlet
valve A.
•
Output count clear-B: Clear the workload of outlet
valve B.
•
Volume count clear: Select to clear value in 'Shot
volume cc'. Value in 'System Shot volumes cc'
cannot be cleared.
-
Shot volume cc: Display the accumulative
dispense volumes from the last zeroed.
-
System Shot volume cc: Display the total
dispense volumes from the first time the
system starts to work. This cannot be cleared.
to
Advertisement
Table of Contents
