Power Button Board - HP Pavilion 13 x2 Maintenance And Service Manual

Power button board

Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
on page
5. Remove the display rear cover (see
6. Disconnect the battery cable (see
7. Remove the display rear cover (see
Remove the power button board:
1. Disconnect the power button board cable (1) from the system board.
2. Use a flat tool to pry the board up and loosen the adhesive that secures it to the tablet (2).
3. Remove the power button board (3) from the tablet.
Reverse this procedure to install the power button board.
58 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
30).
Releasing the tablet from the keyboard dock
Display rear cover on page
Battery cable on page 44).
Display rear cover on page
Spare part number
732281-001
43).
43)