Table of Contents
Advertisement
Hard drive
Component
500-GB, 5400-rpm hard drive
320-GB, 5400-rpm hard drive
Hard Drive Hardware Kit (includes cable, cover, and screws)
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Disconnect the tablet from the keyboard dock (see
on page
5.
Remove the base enclosure (see
6.
Disconnect the battery cable.
Remove the hard drive:
1.
Remove the three Phillips PM2.0×5.0 screws (1) that secure the hard drive to the dock.
2.
Disconnect the hard drive cable (2) from the hard drive.
32
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
30).
Base enclosure on page
Releasing the tablet from the keyboard dock
31.
Spare part number
683802-005
645193-005
732279-001
Advertisement
Table of Contents
